基于CFD-DEM方法的净化器流场模拟与结构优化

针对空气净化器能耗高的问题，使用离散元方法(DEM)在吸附滤网中建立随机堆积柱形活性炭模型，采用计算流体力学(CFD)方法对空气净化器内部流场进行数值模拟，在模拟与实验验证的基础上，考察了压降最小、流场最均匀的吸附滤网结构。结果表明，空气净化器压降主要发生在轴向，活性炭吸附滤网中回流、沟流现象严重，流体阻力是其他两种滤网的3倍。边数对多边形填充孔结构吸附滤网内压降与流场均匀性无影响，当孔结构改为圆形时，压降减小约52 Pa，节能18.4%(49 W)；当孔直径由8 mm增至12 mm，压降减小约48 Pa，节能19.4%(45 W)；滤网间距对空气净化器压降无影响，圆形、小孔径的吸附滤网内流场最均匀。     

Flow Cytometry: From Experimental Design to Its Application in the Diagnosis and Monitoring of Respiratory Diseases

Recent advances in the field of flow cytometry (FCM) have highlighted the importance of incorporating it as a basic analysis tool in laboratories. FCM not only allows the identification of cell subpopulations by detecting the expression of molecules in the cell membrane or cytoplasm, but it can also quantify and identify soluble molecules. The proper functioning of the FCM requires six fundamental systems, from those related to the transport of events to the systems dedicated to the analysis of information. In this review, we have identified the main considerations that every FCM user must know for an optimal antibody panel design, the quality systems that must govern the FCM protocols to guarantee reproducible results in research or clinical laboratories. Finally, we have introduced the current evidence that highlights the relevance of FCM in the investigation and clinical diagnosis of respiratory diseases, establishing important advances in the basic and clinical study of diseases as old as Tuberculosis along with the recent proposals for the monitoring and classification of patients infected with the new SARS-CoV2 virus.     

枞树型核电轮槽精铣刀制造技术优化设计

以枞树型叶根精铣刀为例,阐述了可换硬质合金型线刀体和刀片精铣刀的优化设计、制造工艺、建模及优化设计,进行切削过程加工策略优化和加工过程模拟,设计制造了锥柄专用工装及检测环规、磨削刀片后角专用工装,采用NUMROTO软件编制刀片加工工步。该项目研制的可换刀片精铣刀型线精度完全能达到进口铣刀水平,能满足大部分轮槽与叶根加工对型线精度的要求,可以大幅度节约刀具费用。     

Tuning the pH-responsiveness capability of poly(acrylic acid-co-itaconic acid)/NaOH hydrogel: Design,swelling, and rust removal evaluation

The swelling behavior of poly(acrylic acid-co-itaconic acid)/NaOH hydrogel as well as its ability for iron and copper rust removal was studied and established for the first time. Through an experimental design, the influence of the synthesis parameters on hydrogel response was determined. It was found that pH-responsiveness dependence of hydrogel determines its application. In alkaline media, the hydrogel acted as superabsorbent, while in acidic, the most outstanding property was its pickling capability that allowed to clean carbon steel and copper metallic surfaces. Infrared, thermogravimetry, and scanning electron microscopy were performed to determine copolymer formation, thermal properties, and morphology. Metallic crystallographic phases formed during the corrosion processes were determined by X-ray diffractometer. Hydrogel adhesiveness followed by diffusion and dissolution of metal oxides species was identified as the main steps in the rust removal mechanism. This method offers a new, environmentally friendly perspective to eliminate corrosion from metallic surfaces compared with traditional strategies. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48403.     

Multiemotional product color design using gray theory and nondominated sorting genetic algorithm-III

When users select products, they consider the emotional experience resulting from the color of the product. However, the emotional demands of users for product color are multidimensional and diverse. It is very important yet difficult to accurately grasp multiemotional image requirements and effectively convert them into design elements. Therefore, multiemotional product color design (MEPCD) has become a very important and challenging research topic. In this article, a novel MEPCD system using gray theory (GT) and nondominated sorting genetic algorithm-III (NSGA-III) is proposed to effectively solve the MEPCD problem. First, the image perception spaces of users, which exist in different emotional dimensions, were collected using factor analysis and the semantic differential technique. Then, GT was used to establish a multidimensional emotional product color image evaluation model. Finally, NSGA-III was used to optimize and design a multiemotional color scheme for a product. Furthermore, according to actual conditions, an MEPCD system was established based on the proposed method. The design case study shows that the method and design system proposed in this article have a certain range of applicability and can effectively improve the practicality of MEPCD.     

深水水下管汇的结构设计概述

以南海某油气田的深水水下管汇为例,结合管汇的功能需求、结构组成、结构计算等,对深水水下管汇的结构设计进行了概述。     

Peptide–Peptide Co-Assembly: A Design Strategy for Functional Detection of C-peptide,A Biomarker of Diabetic Neuropathy

Diabetes-related neuropathy is a debilitating condition that may be averted if it can be detected early. One possible way this can be achieved at low cost is to utilise peptides to detect C-peptide, a biomarker of diabetic neuropathy. This depends on peptide-peptide co-assembly, which is currently in a nascent stage of intense study. Instead, we propose a bead-based triple-overlay combinatorial strategy that can preserve inter-residue information during the screening process for a suitable complementary peptide to co-assemble with C-peptide. The screening process commenced with a pentapeptide general library, which revealed histidine to be an essential residue. Further screening with seven tetrapeptide focused libraries led to a table of self-consistent peptide sequences that included tryptophan and lysine at high frequencies. Three complementary nonapeptides (9mer com-peptides), wpkkhfwgq (Trp-D), kwkkhfwgq (Lys-D), and KWKKHFWGQ (Lys-L) (as a negative control) were picked from this table for co-assembly studies with C-peptide. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) and circular dichroism (CD) spectroscopies were utilized to study inter-peptide interactions and changes in secondary structures respectively. ATR-FTIR studies showed that there is indeed inter-peptide interaction between C-peptide and the tryptophan residues of the 9mer com-peptides. CD studies of unaggregated and colloidal C-peptide with the 9mer com-peptides suggest that the extent of co-assembly of C-peptide with Trp-D is greatest, followed by Lys-D and Lys-L. These results are promising and indicate that the presented strategy is viable for designing and evaluating longer complementary peptides, as well as complementary peptides for co-assembly with other polypeptides of interest and importance. We discuss the possibility of designing complementary peptides to inhibit toxic amyloidosis with this approach.     

航天用多弧段封头淬火装置优化设计

提出了某航天产品用多弧段封头产品的淬火处理方法;通过有限元分析,得出了多弧段封头在底部约束情况下的热处理畸变趋势;建立了多弧段封头淬火装置的三维模型,介绍了多弧段封头淬火装置的基本结构。通过有限元分析得出在淬火装置约束下,多弧段封头热处理,总畸变量为16.0 mm,Z向15.0 mm,X向8.5 mm。通过对多弧段封头淬火装置的热畸变情况分析,提出了淬火装置的优化设计方案,优化后的多弧段封头的热处理,总畸变量为7.0 mm,Z向10.0 mm,X向3.0 mm。解决了多弧段封头热处理畸变过大问题,并通过生产验证。     

王村煤业MG400/930-WD(3.3)型电牵引采煤机截割部扭矩轴优化设计研究

针对王村煤业MG400/930-WD(3.3)型电牵引采煤机截割部扭矩轴在截割电机负载超载情况发生断裂不能实现对截割电机保护的问题,本文提出了一种截割部扭矩轴设计优化方案。方案主要进行了扭矩轴材料选择、表面处理工艺改进以及卸荷槽的再设计,并对卸荷槽进行了参数试验,优化后的扭矩轴可以在电机超载时及时断裂,有效保护截割电机。